Where have I been !

September 12th, 2010 Nitin Gupta Posted in General, The Rover | No Comments »

Yes, I have been away. Changing Jobs and Cities with a family – wufff never that thought it would be so difficult. Have been doing it all these years, but with 2 kids, of which one going to school it makes it all that difficult.

So the news is that I have moved from Bangalore (Southern India) to Gurgaon (Northern India). From a Pre-Sales Consulting job to managing in-house IT Support for a Medical Equipment manufacturing giant. I gave it a lot of thought before taking up this new role, let us se how it goes – so far so good :-) !

I should be active now….I am back !

Technorati Tags: ,,
AddThis Social Bookmark Button

Microsoft Messaging Migration Fees for BPOS (Standard & Dedicated)

July 20th, 2010 Nitin Gupta Posted in Exchange, Geekism, General | No Comments »

Here it goes, the minimum seats for Dedicated are 5000 and for Standard (multi-tenant) are 2400.

image

You can download the Rate card for Microsoft-led messaging migration fees for both BPOS Standard and Dedicated from here http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=05985e7a-8211-4471-96de-262678a37a15

Quick Details

File Name: BPOS Messaging Migration Fees Standard Rate Card July 2010.pdf
Version: July 2010
Date Published: 7/20/2010
Language: English
Download Size: 230 KB

Technorati Tags: ,,
AddThis Social Bookmark Button

Quick Info: Placement of Servers in Microsoft IT Exchange Server 2010 Environment

July 19th, 2010 Nitin Gupta Posted in Exchange, Geekism, General | No Comments »

If you have been through the Architecture and Design document published by Microsoft IT you would get some quick information on placements on Exchange Servers at Microsoft spread across for 4 datacenters…..

Server role

Redmond

Dublin

Singapore

Sao Paulo

Technology

Mailbox

41

16

16

4

Exchange DAGs
Hub Transport

11

5

4

0

Automatic load balancing through Mail Submission Service
Hardware load balancers for incoming mail connectivity
Client Access

28

14

12

0

Hardware load balancers internally and externally
Unified Messaging

5

3

3

0

Automatic round-robin load balancing between Unified Messaging servers
Multiple voice over IP (VoIP) gateways per dial plan
Multiple-Role

0

0

0

2

Not applicable

And a quick look at the DAG Configurations….

DAG model Location Number of actual mailboxes Number of supported mailboxes Storage architecture Disk type
11 node Redmond

29,913

33,000

JBOD

3.5” 1-terabyte SAS
11 node Redmond

28,861

33,000

JBOD

3.5” 1-terabyte SAS
10 node Redmond

26,171

30,000

JBOD

3.5” 1-terabyte SAS
16 node Dublin

33,260

48,000

JBOD

3.5” 1-terabyte SAS
16 node Singapore

37,698

48,000

JBOD

3.5” 1-terabyte SAS
4 node Sao Paulo

2,299

12,000

JBOD

3.5” 1-terabyte SAS

This is a good document to refer if you are designing Enterprise Messaging environments of similar sizes. Download it here http://www.microsoft.com/downloads/details.aspx?FamilyID=accec9cd-9c09-4f7e-91c6-41f0e201b680&displayLang=en

AddThis Social Bookmark Button

Microsoft IT: Exchange Server 2010 Design and Architecture

July 19th, 2010 Nitin Gupta Posted in Exchange, Geekism, General | No Comments »

Brief Description

By replacing Exchange Server 2007 servers with servers running Exchange Server 2010, Microsoft IT created new opportunities to drive down costs and system complexities while at the same time increasing security and deploying new features not available in previous versions of Exchange Server.

Quick Details

File Name: 0941_ExchangeServer2010ArchitectureTWP.docx
Version: 07/2010
Date Published: 7/12/2010
Language: English
Download Size: 8.2 MB

Download here http://www.microsoft.com/downloads/details.aspx?FamilyID=accec9cd-9c09-4f7e-91c6-41f0e201b680&displayLang=en

AddThis Social Bookmark Button

Exchange MVP - Again !

July 7th, 2010 Nitin Gupta Posted in General | 2 Comments »

Folks…

I am really happy to state that I have been awarded MVP for Exchange Server for the second year running. I got this mail last week, but was too busy travelling and somehow missed it.

It is an honor and I would like to thank my MVP lead, Microsoft and people who have

image

Thanks to all of you……

AddThis Social Bookmark Button

Exchange 2007 SP3 Password Reset Tool

June 21st, 2010 Nitin Gupta Posted in Exchange, Geekism, General | No Comments »

Though we can change passwords using OWA, but what happens if your password is expired or it is the case of first logon password change, in such cases OWA was never the tool to use. Unlike previous versions IISADMPWD Web application is not available in Windows Server 2008, resulting in that not being an option for administrators…

With Exchange Server 2007 SP3 there is a new IIS 7 Module in Client Access server (CAS) that that detects expired passwords and redirects users to a new change password page.

Now that this feature is disabled by default, to avail this Password Reset feature administrators need to enable this…..To enable the password reset feature

  1. Log on Client Access Server | Registry Editor
  2. Go to HLKM\SYSTEM\CurrentControlSet\Services\MSExchange OWA
  3. Create the following DWORD value if it does not already exist:
    Value name: ChangeExpiredPasswordEnabled
    Value type: REG_DWORD
    Value data: 1

You are all set !

 

AddThis Social Bookmark Button

Exchange Server 2007 SP3 supports Windows Server 2008 R2

June 21st, 2010 Nitin Gupta Posted in Exchange, Geekism, General | 1 Comment »

Exchange-2010-Logo-733341Microsoft has already made Exchange Server 2007 SP3 available for download and with that comes a wonderful news….. Yes, it supports Windows Server 2008 R2 also…..

Exchange Server 2007 SP3 supports all Exchange 2007 roles on the Windows Server 2008 R2 operating system. Exchange 2007 SP3 provides imagesupport only for a new installation of Exchange on Windows Server 2008 R2. Exchange 2007 SP3 is not supported in an upgrade scenario on Windows Server 2008 R2.

Exchange 2007 SP3 does not support the following installation scenarios:

  • A new Exchange 2007 SP3 installation on a Windows Server 2008 R2-based computer that has been upgraded from Windows Server 2008
  • Upgrading Exchange 2007 SP2 to Exchange 2007 SP3 on a Windows Server 2008 R2-based computer that has been upgraded from Windows Server 2008
  • Upgrading the operating system from Windows Server 2008 to Windows Server 2008 R2 on a computer that has Exchange 2007 SP3 installed

To see how to install Exchange 2007 SP3 on Windows Server 2008, refer http://technet.microsoft.com/en-us/library/bb691354(EXCHG.80).aspx

AddThis Social Bookmark Button

Exchange Server 2007 Service Pack (SP) 3 – Available for Download

June 21st, 2010 Nitin Gupta Posted in Exchange, Geekism, General | 1 Comment »

Folks, the Exchange 2007 SP3 bits have been released by Microsoft……

Overview:

Microsoft Exchange Server 2007 Service Pack 3 (SP3) has been designed specifically to meet the challenges facing our customers and to help address the needs of all the different businesses and organizations utilizing our Exchange Server 2007 enterprise messaging system.

Exchange Server 2007 SP3 is a mission-critical communications tool that enables employees to be more productive and access their information anywhere and anytime while providing a messaging system that enables rich, efficient access to e-mail, calendar items, voice mail, and contacts.

For administrators, Exchange Server 2007 SP3 provides further flexibility with the addition of Windows Server 2008 R2 support for server roles and Windows 7 support for the Exchange management tools. These additions, along with enhancements for the advanced protection options against e-mail security threats, such as spam and viruses and the tools which help manage internal compliance and high availability needs provide Exchange administrators with the tools they need to manage their Exchange 2007 environments efficiently.

Note: Clean installations of Exchange 2007 SP3 on a new server are possible by using this download in the same manner as you would install Exchange 2007 RTM, Exchange 2007 SP1 or Exchange 2007 SP2.

Quick Details

Version: 8.03.0083.006
Date Published: 6/20/2010
Language: English
Download Size: 878.9 MB - 1773.2 MB*
Download Here: http://www.microsoft.com/downloads/details.aspx?FamilyID=1687160b-634a-43cb-a65a-f355cff0afa6&displaylang=en
Files:  E2K7SP3EN32.exe &  E2K7SP3EN64.exe

Please review:

So, go ahead and install Exchange 2007 SP3 !!!

Technorati Tags: ,,

 

AddThis Social Bookmark Button

Exchange 2010 SP1: Add/Modify Mailbox Folder Permissions (Add-MailboxFolderPermission and Set-MailboxFolderPermission)

June 21st, 2010 Nitin Gupta Posted in Exchange, Geekism, General | No Comments »

In Exchange 2010 RTM,  a new cmdlet “Add-MailboxFolderPermission” was added that enabled Administrators (with necessary permissions) to delegate folder-level permissions for all folders within a user’s mailbox. The limitation of this cmdlet was that, once a user was given permission to a mailbox folder, then you could not change the permissions, you had to remove the user permission using “Remove-MailboxFolderPermission” and then re-assign the permissions.

With Exchange 2010 SP1 (beta), we now have a new cmdlet “Set-MailboxFolderPermission”, that helps in editing an existing permission entry. To be able to use Set-MailboxFolderPermission cmdlet on a mailbox for assigning permissions to a user, an entry should already be present. So this means, before running Set-MailboxFolderPermission on a mailbox, we need to set permissions for a user with Add-MailboxFolderPermission first.

Let me explain this with an example.

Let us first look at the Add-MailboxFolderPermission cmdlet…In my example I will give permissions to user “Quest-User99” the “Reviewer” permissions on Inbox folder of the mailbox “Nitin Gupta”.

Add-MailboxFolderPermission -Identity ngupta@quest-demo.com:\Inbox -User quest-user99@quest-demo.com -AccessRights ReadItems

Set-MailboxFolderPermission Mailbox Folder Permissions

Once this is done, we will use the Get-MailboxFolderPermission cmdlet to check the permissions….

Get-MailboxFolderPermission -Identity ngupta@quest-demo.com:\Inbox

Set-MailboxFolderPermission Mailbox Folder Permissions

So far so good, now let us try to use Add-MailboxFolderPermission cmdlet to change the permissions of ‘”Quest-User99” on the mailbox “Nitin Gupta”  to FolderVisible….

Add-MailboxFolderPermission -Identity ngupta@quest-demo.com:\Inbox -User quest-user99@quest-demo.com -AccessRights FolderVisible

So what happens, as mentioned in the beginning we encounter an error….

An existing permission entry was found for user: Quest-User99.
    + CategoryInfo          : NotSpecified: (0:Int32) [Add-MailboxFolderPermission], UserAlreadyExis…nEntryException
    + FullyQualifiedErrorId : CACE8CC4,Microsoft.Exchange.Management.StoreTasks.AddMailboxFolderPermission

Set-MailboxFolderPermission Mailbox Folder Permissions

This means that Add-MailboxFolderPermission cannot be used to modify an existing permission, so what was the workaround till Exchange 2010 RTM, remove the permissions and re-assign…

What happens now with Exchange 2010 SP1 (beta)….

With SP1, we now have “Set-MailboxFolderPermission” that we will use to modify the permissions….

Set-MailboxFolderPermission -Identity ngupta@quest-demo.com:\Inbox -User quest-user99@quest-demo.com -AccessRights FolderVisible

Set-MailboxFolderPermission Mailbox Folder Permissions

Set-MailboxFolderPermission Mailbox Folder Permissions

Wonderful, now let us look at the option where there is no permission entry for a user on a mailbox. To see, let us remove the permissions of “Quest-user99”” from the Inbox folder on mailbox “Nitin Gupta”

Remove-MailboxFolderPermission -Identity ngupta@quest-demo.com:\Inbox -User quest-user99@quest-demo.com

Set-MailboxFolderPermission Mailbox Folder Permissions

Set-MailboxFolderPermission Mailbox Folder Permissions

So now “Quest-User99” does not have any permission on mailbox “Nitin Gupta”. Let us run the cmdlet, Set-MailboxFolderPermission

[PS] C:\>Set-MailboxFolderPermission -Identity ngupta@quest-demo.com:\Inbox -User quest-user99@quest-demo.com -AccessRights Owner

There is no existing permission entry found for user: Quest-User99.
    + CategoryInfo          : NotSpecified: (0:Int32) [Set-MailboxFolderPermission], UserNotFoundInPermissionEntryException
    + FullyQualifiedErrorId : 4A3CC18C,Microsoft.Exchange.Management.StoreTasks.SetMailboxFolderPermission

Set-MailboxFolderPermission Mailbox Folder Permissions

This shows that a permission entry is required, before we can use Set-MailboxFolderPermission to edit/modify the permissions

 

The List of Permissions that can be set using the AccessRights parameter are as follows [Source: http://technet.microsoft.com/en-us/library/dd298062(EXCHG.140).aspx]

  • ReadItems   The user has the right to read items within the specified folder.
  • CreateItems   The user has the right to create items within the specified folder.
  • EditOwnedItems   The user has the right to edit the items that the user owns in the specified folder.
  • DeleteOwnedItems   The user has the right to delete items that the user owns in the specified folder.
  • EditAllItems   The user has the right to edit all items in the specified folder.
  • DeleteAllItems   The user has the right to delete all items in the specified folder.
  • CreateSubfolders   The user has the right to create subfolders in the specified folder.
  • FolderOwner   The user is the owner of the specified folder. The user has the right to view and move the folder and create subfolders. The user can’t read items, edit items, delete items, or create items.
  • FolderContact   The user is the contact for the specified public folder.
  • FolderVisible   The user can view the specified folder, but can’t read or edit items within the specified public folder.

The AccessRights parameter also specifies the permissions for the user with the following combination:

  • None   FolderVisible
  • Owner   CreateItems, ReadItems, CreateSubfolders, FolderOwner, FolderContact, FolderVisible, EditOwnedItems, EditAllItems, DeleteOwnedItems, DeleteAllItems
  • PublishingEditor   CreateItems, ReadItems, CreateSubfolders, FolderVisible, EditOwnedItems, EditAllItems, DeleteOwnedItems, DeleteAllItems
  • Editor   CreateItems, ReadItems, FolderVisible, EditOwnedItems, EditAllItems, DeleteOwnedItems, DeleteAllItems
  • PublishingAuthor   CreateItems, ReadItems, CreateSubfolders, FolderVisible, EditOwnedItems, DeleteOwnedItems
  • Author   CreateItems, ReadItems, FolderVisible, EditOwnedItems, DeleteOwnedItems
  • NonEditingAuthor   CreateItems, ReadItems, FolderVisible
  • Reviewer   ReadItems, FolderVisible
  • Contributor   CreateItems, FolderVisible

The following roles apply specifically to calendar folders:

  • AvailabilityOnly   View only availability data
  • LimitedDetails   View availability data with subject and location

 

AddThis Social Bookmark Button

Exchange 2010 – Set Default Language in Outlook Web App (OWA)

June 20th, 2010 Nitin Gupta Posted in Exchange, Geekism, General | 2 Comments »

When a new user logs into Outlook Web App, he/she is prompted to choose the Language and Time Zone.

OWA - Language

 

The default value for Language setting is 0, i.e. not defined resulting in users being prompted to choose a language the first time that they sign in to Outlook Web AppAdministrators can specify the default language, so that the users are not prompted to select Language as shown above. The Default language for OWA can be set using the following command.  

Set-OWAVirtualDirectory “owa (Default Web Site)” -DefaultClientLanguage <Language code>

OWA - Default Language

In this example I have changed the default client language to Catalan, this causes the default folders names to be renamed based on the specified language i.e. Catalan.

OWA - Default Language

Note:

  • Once the default client language is specified when the users try to login for the first time (ever) in OWA, they are not prompted to choose a language and OWA Time Zone is picked up from the time zone of Client Access Server.
  • In OWA then The Users can use Regional Settings in Outlook Web App to change Client language and time zone after they sign in.
  • The change does not affect users who had already logged in once, before the default Language is specified
  • List of Language Codes can be found here: http://technet.microsoft.com/en-us/library/aa997435.aspx

A Weird Issue:

Now that I belong to India, I tried to set Default Language to Hindi and bum, I was in for a surprise, I encountered an error

[PS] C:\>Set-OwaVirtualDirectory “owa (Default Web Site)” -DefaultClientLanguage 1081
Invoke-Command : Cannot bind parameter ‘DefaultClientLanguage’ to the target. Exception setting “DefaultClientLanguage”
: “DefaultClientLanguage contains the value “1081″ which is not a supported LCID value.”

At C:\Users\Administrator\AppData\Roaming\Microsoft\Exchange\RemotePowerShell\w2k8r2-dc-msx.quest-demo.com\w2k8r2-dc-ms
x.quest-demo.com.psm1:54539 char:29
+$scriptCmd = { & <<<<  $script:InvokeCommand `
    + CategoryInfo          : WriteError: (:) [Set-OwaVirtualDirectory], ParameterBindingException
    + FullyQualifiedErrorId : ParameterBindingFailed,Microsoft.Exchange.Management.SystemConfigurationTasks.SetOwaVirt
   ualDirectory

Well, I can set the same at the initial login screen though…

OWA Hindi

Well I have raised this with the product team ! I have not checked to see what all Languages give this error.

 

AddThis Social Bookmark Button

Exchange Server – Documentation (Topic Status)

June 20th, 2010 Nitin Gupta Posted in Exchange, Geekism, General | No Comments »

Over a period of time, I have seen lot of people asking questions on errors in Exchange documentation. It is imperative that one be aware of STATUS of the topic, before pointing it out to the Product Team & Technical Writers. Though Microsoft makes the documentation available, there is a clear status on every topic on the accuracy and progress.

Every Topic starts with the status

Exchange Documentation Topic Status

The list of all Topic Status is as follows…..

Value

Description

Writing Not Started The topic is present in the table of contents, but it contains either no content or incomplete content. Incomplete content could include legacy Exchange documentation.
Writing Content is being written or updated.
Ready for Tech Review Content is ready to be reviewed by subject matter experts.
In Tech Review Content has been submitted for review.
Revising Per Tech Review Review comments are being analyzed and incorporated by the writer.
Editing Content is being edited for syntax, structure, and technical accuracy.
Revising Per Edit Edits are being analyzed and incorporated by the writer.
Back to Editor Content has been revised per edits and is being analyzed and incorporated by editor.
Ready for Copy Edit Content is ready for copy edit.
Revising Per Copy Edits Copy edits are being analyzed and incorporated by the editor.
Milestone Ready Content has been reviewed for technical accuracy and edited.
Content Complete Content is complete

Same applies to Exchange 2010 SP1 documentation that has been made available, most of it is not Content Complete.

Technorati Tags: ,

 

AddThis Social Bookmark Button

OT - Active Directory Migration Tool (ADMT) version 3.2

June 20th, 2010 Nitin Gupta Posted in Geekism, General | No Comments »

Ok, ADMT 3.2 is finally out. The Active Directory Migration Tool version 3.2 (ADMT v3.2) provides an integrated toolset to facilitate migration and restructuring tasks in an Active Directory Domain Services infrastructure.

The Active Directory Migration Tool version 3.2 (ADMT v3.2) simplifies the process of migrating objects and restructuring tasks in an Active Directory® Domain Service (AD DS) environment. You can use ADMT v3.2 to migrate users, groups, service accounts, and computers between AD DS domains in different forests (inter-forest migration) or between AD DS domains in the same forest (intra-forest migration). ADMT can also perform security translation (to migrate local user profiles) when performing inter-forest migrations.

File Name: admtsetup32.exe
Version: 3.2
Date Published: 6/18/2010
Language: English
Download Size: 4.1 MB
 

 System Requirements

  •  
  • Supported Operating Systems: Windows Server 2008 R2
  • ADMT can be installed on any computer capable of running the Windows Server 2008 R2 operating system, unless they are Read-Only domain controllers or in a Server Core configuration.
  • Target domain: The target domain must be running Windows Server 2003, Windows Server 2008, or Windows Server 2008 R2
  • Source domain: The source domain must be running Windows Server 2003, Windows Server 2008, or Windows Server 2008 R2
  • The ADMT agent, installed by ADMT on computers in the source domains, can operate on computers running Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2.

Download Here: http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=20c0db45-db16-4d10-99f2-539b7277ccdb

Technorati Tags:

 

AddThis Social Bookmark Button

Update Rollup 4 for Exchange Server 2010 (KB982639)

June 18th, 2010 Nitin Gupta Posted in Exchange, Geekism, General | No Comments »

Update Rollup 4 for Exchange Server 2010 has been released and resolves issues that were found in Exchange Server 2010 since the software was released.

Note: This update rollup is highly recommended for all Exchange Server 2010 customers.

File Name: Exchange2010-KB982639-x64-en.msp
Version: 14.0.702.1
Knowledge Base (KB) Articles: KB982639 
Date Published: 6/17/2010
Language: English
Download Size: 34.2 MB

Issues that the update rollup fixes

Prerequisites

The following list contains prerequisites for the Update Rollup 4 for Exchange Server 2010 RTM:

  • Install Exchange Server 2010 RTM on the computer before you apply this update rollup.
  • Remove all interim updates for Exchange Server 2010 before you apply this update rollup.

Restart requirement

The required services are automatically stopped and then restarted when you apply this update rollup.

Removal information

To remove Update Rollup 4 for Exchange Server 2010 RTM, use Add or Remove Programs in Control Panel. Then, remove update 982639.

AddThis Social Bookmark Button

Microsoft Exchange Server Jetstress 2010 (64 bit) - Tool

June 17th, 2010 Nitin Gupta Posted in Exchange, Geekism, General | No Comments »

Brief Description

Simulate disk I/O load on a test server running Exchange to verify the performance and stability of your disk subsystem before putting your server into a production environment.

Overview

Use Jetstress 2010 to verify the performance and stability of a disk subsystem prior to putting a Microsoft Exchange Server 2003, 2007 and 2010 server into production. Jetstress helps verify disk performance by simulating Exchange disk Input/Output (I/O) load. Specifically, Jetstress simulates the Exchange database and log file loads produced by a specific number of users. You use Performance Monitor, Event Viewer, and ESEUTIL in conjunction with Jetstress to verify that your disk subsystem meets or exceeds the performance criteria you establish. After a successful completion of the Jetstress Disk Performance and Stress Tests in a non-production environment, you will have ensured that your Exchange disk subsystem is adequately sized (in terms of performance criteria you establish) for the user count and user profiles you have established. It is highly recommended that the Jetstress user read through the tool documentation before using the tool.

System Requirements

  • Supported Operating Systems: Windows 2000 Service Pack 4; Windows Server 2003; Windows Server 2008; Windows Server 2008 R2
  • Microsoft Exchange 2003
  • Microsoft Exchange 2007
  • Microsoft Exchange 2010

File Name: Jetstress.msi
Version: 14.01.0180.003
Date Published: 6/17/2010
Language: English
Download Size: 996 KB

Download Here: http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=13267027-8120-48ed-931b-29eb0aa52aa6

AddThis Social Bookmark Button

Exchange Load Generator 2010 (64 bit & 32 bit)

June 16th, 2010 Nitin Gupta Posted in Exchange, Geekism, General | 1 Comment »

Brief Description:
Exchange Load Generator is a simulation tool to measure the impact of MAPI, OWA, ActiveSync, IMAP, POP and SMTP clients on Exchange servers.

Overview:
Use Microsoft Exchange Load Generator 2010 (LoadGen) as a simulation tool to measure the impact of MAPI, OWA, ActiveSync, IMAP, POP and SMTP clients on Exchange 2010 and 2007 servers. LoadGen allows you to test how a server running Exchange 2010/2007 responds to e-mail loads. To simulate the delivery of these messaging requests, you run LoadGen tests on client computers. These tests send multiple messaging requests to the Exchange server, thereby causing a mail load. LoadGen is a useful tool for administrators who are sizing servers and validating a deployment plan. Specifically, LoadGen helps you determine if each of your servers can handle the load to which they are intended to carry. Another use for LoadGen is to help validate the overall solution.

These version are intended for Microsoft Exchange 2010 and 2007 Servers only.

Exchange Load Generator 2010 (64 bit)
File Name: Loadgen.msi
Version: 14.01.0180.003
Date Published: 6/15/2010
Download Size: 13.9 MB

Exchange Load Generator 2010 (32 bit)
File Name: Loadgen.msi
Version: 14.01.0180.003
Date Published: 6/15/2010
Download Size: 14.1 MB

Important: LoadGen should be used only in laboratories that have no connection to the production environment. This tool should not be used in any way in a production environment or an environment that is mission critical or contains important information of any kind anywhere in the network.

Note: There are now three OWA modules:

  • OWA2007Module (Exchange 2007),
  • OWA2010Module (Exchange 2010 RTM) and
  • OWAModule (Exchange 2010 SP1 or latest).

Please use the correct version for your environment.

Technorati Tags:
AddThis Social Bookmark Button